0:01
hi in this tutorial I'm going to show
0:02
you on how you can change the weight of
0:04
a line in Ana if you have a line or
0:07
multiple lines and you feel like the
0:09
lines are too thin and not very visible
0:12
when you look at the design then one way
0:14
to make the line bigger is to change its
0:17
thickness or basically changing the
0:20
weight of the line so I have multiple
0:23
lines here and I'm going to make them a
0:25
bit thicker uh by the way if you want to
0:27
insert line you can go to elements and
0:30
shapes and you can click on a line
0:33
design to to be inserted to be to your
0:35
document it's located right here anyway
0:38
let's start with this line you can click
0:40
on it and after that there is a top
0:43
toolbar menu you can click on line style
0:46
and then you can change the line weight
0:48
so by default it's six pixel or six
0:51
points I don't know the measurement that
0:52
they are used here but the number was
0:55
six so to make it bigger or thicker you
0:58
can click and drag the slide to the
1:01
right to make it way bigger and thicker
1:04
remember the length is still the same B
1:06
but the weight is now a lot bigger you
1:10
can also just manually enter number from
1:12
0o to 100 to make the line thicker and
1:16
also there's an option to enable and run
1:18
points I think that is usually
1:21
appropriate to be enabled especially if
1:23
you want to make the design to be to to
1:26
be a little better to be more rounder so
1:29
I usually enable that setting you can do
1:31
the same for other lines for for example
1:34
this Dash lines I can do the same let's
1:37
increase the line weight and as you can
1:39
see it's way thicker now and of course
1:42
you can select multiple lines together
1:44
and you can do the same you can apply
1:46
the setting for multiple lines so yeah
1:50
that's basically it that's how you can
1:52
increase the thickness or change the
1:54
weight of a line in Cana
