/ How to

How to Fix the 0x00000050 Stop Error in Windows 10

Key Takeaways

  • The 0x00000050 stop error is a blue screen of death (BSOD) error that can occur due to hardware or software issues in Windows 10.
  • Common causes include faulty or outdated drivers, corrupted system files, malware infections, and hardware failures.
  • Troubleshooting steps involve running hardware diagnostics, updating drivers, performing a clean boot, running System File Checker (SFC) and DISM tools, and potentially reinstalling Windows.

The 0x00000050 stop error, also known as the “PAGE_FAULT_IN_NONPAGED_AREA” error, is a blue screen of death (BSOD) error that can occur in the Windows 10 operating system. This error typically indicates a problem with a critical system file or a hardware component, which can prevent Windows from running properly. When this error occurs, your computer will suddenly restart, and you’ll see a blue screen with the error code 0x00000050.

There are several potential causes for this error, including faulty or outdated drivers, corrupted system files, malware infections, and hardware failures. In this article, we’ll explore various methods to help you troubleshoot and fix the 0x00000050 stop error in Windows 10.

Step 1: Check for Hardware Issues

Hardware issues, such as faulty RAM, hard drive, or other components, can sometimes cause the 0x00000050 stop error. To rule out hardware problems, you can perform the following steps:

  1. Run a memory test: Windows 10 includes a built-in memory diagnostic tool that can help you identify issues with your RAM. To run the test, go to the Start menu, search for “Windows Memory Diagnostic,” and follow the on-screen instructions.
  2. Check for hard drive errors: A failing hard drive can also cause the 0x00000050 error. You can use the built-in Check Disk utility in Windows to scan your hard drive for errors. Right-click on the drive you want to check, select “Properties,” navigate to the “Tools” tab, and click “Check” under the “Error checking” section.
  3. Update BIOS and firmware: Outdated BIOS or firmware can sometimes cause compatibility issues with hardware components, leading to the 0x00000050 error. Check your computer manufacturer’s website for any available BIOS or firmware updates and follow the instructions to install them.

If you identify any hardware issues during these checks, you may need to replace the faulty component or seek professional assistance.

Step 2: Update Drivers

Outdated or corrupted drivers can also cause the 0x00000050 stop error in Windows 10. To update your drivers, follow these steps:

  1. Update drivers automatically: Windows 10 includes a built-in driver update tool that can automatically search for and install the latest drivers for your hardware components. Go to the Start menu, search for “Device Manager,” and click on it. In the Device Manager window, right-click on each device category and select “Update driver” or “Update driver software.”
  2. Update drivers manually: If the automatic driver update process doesn’t work, you can manually download and install the latest drivers from your hardware manufacturer’s website. Make sure to download the correct drivers for your specific hardware components and follow the installation instructions carefully.

Step 3: Perform a Clean Boot

A clean boot can help you identify if a third-party application or service is causing the 0x00000050 stop error. Here’s how to perform a clean boot in Windows 10:

  1. Press the Windows key + R to open the Run dialog box.
  2. Type msconfig and press Enter to open the System Configuration utility.
  3. Navigate to the “Services” tab and check the “Hide all Microsoft services” box.
  4. Click “Disable all” to disable all third-party services.
  5. Navigate to the “Startup” tab and click “Open Task Manager.”
  6. In the Task Manager window, disable all startup items by right-clicking on each item and selecting “Disable.”
  7. Close the Task Manager and System Configuration utility, and restart your computer.

If the 0x00000050 stop error doesn’t occur during a clean boot, it’s likely that a third-party application or service is causing the issue. You can then enable services and startup items one by one to identify the culprit.

Step 4: Run System File Checker (SFC) and DISM

Corrupted system files can also lead to the 0x00000050 stop error in Windows 10. You can use the built-in System File Checker (SFC) and Deployment Image Servicing and Management (DISM) tools to scan for and repair corrupted system files.

  1. Run SFC: Open the Command Prompt as an administrator and type the following command, then press Enter:
   sfc /scannow

This will scan your system files and attempt to repair any corrupted files.

  1. Run DISM: If the SFC scan doesn’t resolve the issue, you can try running the DISM tool. Open the Command Prompt as an administrator and type the following commands, pressing Enter after each one:
   DISM /Online /Cleanup-Image /CheckHealth
   DISM /Online /Cleanup-Image /ScanHealth
   DISM /Online /Cleanup-Image /RestoreHealth

These commands will scan your Windows image for any corruption and attempt to repair it.

Step 5: Reinstall Windows

  1. Create a Windows 10 installation media: You can create a bootable USB drive or DVD using the Media Creation Tool from Microsoft’s website.
  2. Boot from the installation media: Restart your computer and boot from the installation media you created.
  3. Follow the on-screen instructions: During the installation process, you’ll have the option to keep your personal files or perform a clean install. Choose the option that best suits your needs.

After reinstalling Windows 10, you’ll need to reinstall your programs and restore your personal files from the backup.

By following these steps, you should be able to troubleshoot and fix the 0x00000050 stop error in Windows 10. If the issue persists, you may need to seek professional assistance or consult with Microsoft support.

Related Posts